Calculate your proptech boost!

Energy optimization agent for building operations

Find, fix and prove energy savings across your portfolio

Your buildings already raise dozens of energy alerts a month. The energy optimization agent turns them into a short list priced in euros, makes the fixes it can, routes the rest, and verifies every saving against a weather-normalized baseline.

More alerts don’t mean more savings

Monitoring agents are good at spotting waste. But a list of alarms doesn’t tell an owner which ones are worth acting on, who should act, or whether the fix actually worked.

 

Alarms aren’t priced

A clogged filter and an idle economizer arrive with the same urgency. One costs a little; the other runs your chillers all spring.

Fixes stall between teams

Some changes can be made from the BMS in seconds. Others need a technician or a capex decision. Without routing, both wait.

Savings go unproven

If a saving can’t be shown against a fair baseline, finance won’t count it and auditors won’t accept it.

 

How it works

One loop: find, rank, act, verify

Find

Collects findings from the free cooling, ventilation, district heating, chiller, setpoint and filter agents, plus an ASHRAE Level I screening of meter data.

Rank

Prices each finding in euros per year from energy use, your tariffs, demand charges and district heating penalties. Duplicates merge; the biggest wins rise to the top.

Act

Applies what the control agents can change, after your approval. Opens service objects for technicians and hands capex measures to the ECM packager.

Verify

Measures each fix against a weather- and occupancy-normalized baseline and reports the verified saving to ISO 50001 and the EU Taxonomy tracker.

 

Interactive demo

Watch one office building go through the loop

Step through a month in a sample office building. Figures are illustrative demo data, not customer results.

Sample buildingOffice · 12,000 m² · Stockholm

37 findings from 9 agents this month

Unpriced, unsorted
  • 06:12AHU-1 economizer at minimum position while outdoor air is 9.4 °CFree cooling maximizer
  • 06:40Chiller 1 running at 18% load with free cooling availableChiller plant monitor
  • 02:05AHU-3 supply airflow at 80% with zero presence detectedNighttime ventilation saver
  • 04:30Heating start 2 h 10 min before occupancyNight setback optimizer
  • 11:20Primary return temperature 6 °C above contract limitDistrict heating return guard
  • 15:02AHU-2 filter pressure drop coefficient up 38% in 30 daysFilter analyzer

+ 31 more. Several describe the same root cause from different angles.

Step 1 of 4 · Illustrative demo data

What each role gets from it

Asset managers

Higher NOI, Taxonomy alignment protected, and a ranked list of which buildings need capex next year.

Property managers

Lower operating costs without new tenant complaints, since comfort agents check every change.

Technical operations

Fewer alarms, and work orders that arrive with the trend data and the reason they matter.

 

Sustainability leads

Verified savings that flow straight into ISO 50001, CSRD and GHG reporting.

Built on the agents you already run

The energy optimization agent doesn’t replace your monitoring agents. It sits on top of them and turns what they find into action.

Finds from

  • Free cooling maximizer
  • Nighttime ventilation saver
  • District heating return guard
  • Chiller plant efficiency monitor
  • HVAC setpoint deviation checker
  • Supply air filter analyzer
  • ASHRAE Level I screening

Acts through

  • Night setback optimizer
  • Peak shaving agent
  • Valve exerciser
  • Service object consolidator

Reports to

  • ISO 50001 EnPI tracker
  • EU Taxonomy tracker
  • BeLok ECM packager
  • GHG climate auditor

See what your buildings are leaving on the table

We’ll run the agent on one of your buildings and show you the ranked list of savings.